2024 is coming to an end, and 2025 is coming soon. At this moment, KINGREAL STEEL SLITTER wants to send you the most sincere blessings, and wish you all the best in the new year!
Thank you all customers for your strong support for KINGREAL STEEL SLITTER. Thanks to your care, KINGREAL STEEL SLITTER is also steadily making machine manufacturing and R&D sales step by step this year.
This article will review KINGREAL STEEL SLITTER 's breakthroughs in coil slitting line and cut to length line this year.
At the beginning of this year, a customer from the United States found KINGREAL STEEL SLITTER. He had extremely high requirements for the high-speed production of the coil slitting machine. First, KINGREAL STEEL SLITTER 's staff sent KINGREAL STEEL SLITTER 's existing coil slitting machine parameter information and machine operation video to the customer through the Internet, asking whether it could meet his production. The customer looked at the information sent to him by KINGREAL STEEL SLITTER and asked whether the existing coil slitting machine could be upgraded to achieve higher-speed production.
After inviting customers to visit the coil slitting machine at KINGREAL STEEL SLITTER’s factory and meeting with engineers, KINGREAL STEEL SLITTER engineers gave customers a satisfactory coil slitting machine solution:
-Coil Thickness: 0.4-5MM
-Coil Material: Gi steel, Cold-rolled Steel, PPGI
-Coil Width:1650MM
-Slitting Speed:230M/Min
 |
 |
 |
Now this high-speed coil slitting machine has been used in the American customer factory for nearly half a year. Some time ago, KINGREAL STEEL SLITTER staff did after-sales tracking and asked customers about the latest use of KINGREAL STEEL SLITTER coil slitting machine and whether KINGREAL STEEL SLITTER can improve. Once again, the American customer praised KINGREAL STEEL SLITTER coil slitting machine. He said: "The production speed of this coil slitting machine has greatly improved my production efficiency, and there have been no problems since its use!"
This year, an Italian customer found KINGREAL STEEL SLITTER through a friend's introduction and proposed to customize the coil slitting machine. His requirement is that the maximum width of the processed metal coil is 850mm. Through full communication between the engineers and the Italian customer, KINGREAL STEEL SLITTER engineers deeply explored the other needs of this customer, and finally developed a perfect slitting machine customization plan for him that fully matched the production needs:
- Coil Thickness:0.3-2MM
- Coil Width:850MM
- Coil Material: Galvanized sheet
 |
 |
 |
Heavy gauge cut to length lines are not common in the market, and most ordinary cut to length lines can only process metal coils with a thickness of 0.2-3mm. An Indonesian customer heard that KINGREAL STEEL SLITTER is good at making customized machines, so he asked if he could make heavy gauge cut to length lines. KINGREAL STEEL SLITTER engineers said that heavy gauge cut to length lines have higher requirements for machine manufacturing, but it is not impossible.
When asking the customer about the thickness of metal coil processing, the customer replied that the maximum thickness of 12mm metal coils needed to be processed. But during the chat, KINGREAL STEEL SLITTER engineers caught the Indonesian customer's plan and demand to expand the thickness of metal coil processing, so they asked whether they wanted to upgrade based on the 12mm thickness. Finally, the heavy gauge cut to length line solution was obtained:
-Coil Thickness: Up To 20MM
- Coil Width: 2000-2500MM
-Coil Material: HR Coil
 |
 |
 |
In May 2024, a Russian customer approached KINGREAL STEEL SLITTER to raise the troubles he encountered in metal processing.
He said that the cut to length line currently used always scratches the surface of the metal sheet when cutting the metal sheet, which greatly affects the next step of processing and manufacturing. KINGREAL STEEL SLITTER engineers pointed out that this is indeed a situation that many customers will encounter, and proposed that a cut to length line with lamination can be manufactured, that is, before the metal sheet is sent to the shearing station, a machine is equipped to cover the metal sheet with a lamination, which can effectively ensure that the surface of the metal sheet remains smooth and scratch-free during the shearing process. The solution of this cut to length line with lamination is:
- Coil Thickness: 0.3-2MM
- Coil Width: 700MM
- Coil Material: Galvanized sheet
- Cutting Speed: 15M/Min
