With the continuous improvement of the standard of the technical level, the hydraulic system is applied in many equipment. In the process of mechanical operation, the hydraulic transmission system is also prone to some problems, such as oil leakage, oil temperature changes, particle contamination and so on. In order to ensure that the slitting machine equipment to play a better mechanical efficiency, enhance its service life, we need to take effective protective measures.
Especially for the metal slitting machine this type of equipment, maintenance of its hydraulic drive system, will be able to effectively ensure its operating status and quality of operation. So, do you know how we should carry out maintenance? Below we will share with you the knowledge in this regard, I hope to be able to help you. First of all, we must ensure that the sealing effect of the oil tank is good, but also should do a good job of dust-proof.
Secondly, when storing hydraulic oil, not only should pay attention to moisture-proof and waterproof, but also should pay attention to avoiding the entry of dust, so as not to cause oil deterioration. Third, the hydraulic transmission system of the splitter equipment must be equipped with filtration devices, so that pollution particles can be removed in a timely manner to ensure that it can operate stably; fourth, the system should be regularly checked pumps, valves, cylinders and other components of the fit gap, when too large to overhaul and adjust to prevent the system from leaking, clean the pump suction of the coarse filter.
In addition to the points described above, we should also give the hydraulic drive system of the slitting machine equipment to set the protective cover, or blowing dust-proof device. In addition, in order to ensure that the system can operate normally under the premise that the oil pump pressure should be adjusted to a lower working pressure, in order to reduce energy consumption and prevent the oil temperature is too high.
In short, as a user, we must pay attention to this aspect of the work, and actively do a good job of slitting machine and other mechanical equipment, hydraulic system maintenance. I believe that doing a good job of these, will be able to play a great role in improving work efficiency.
