Cut To Length Line is used to cut coils of different materials into specified widths according to customers' needs. It can handle coils of different thicknesses and widths, and is widely used in the automotive industry and metal processing and manufacturing industries. Cut To Length Machine usually needs to be equipped with several equipment such as decoiler, leveler, shearing mainframe and automatic stacking, so how to realize high speed production?
High Speed Processing: These lines are capable of processing metal coils at speeds of up to 80M/Min.
Accuracy: Ensure high precision leveling and cutting while achieving length and width tolerances of up to 0.2MM.
Versatility: With unique feed systems, CNC shear heads and digitally positioned strip stacks, these lines allow for quick changeover from job to job.
Ruling and stacking: with different out-feed methods, automatic palletizing can be achieved
KINGREALSTEEL SLITTER design the flying shearing cutting station to realized the high speed working speed, which can reach 80M/Min.The productivity of other key components is also critical to the processing speed of the entire line.
Uncoiler: Uncoilers are used to unroll metal coils and ensure that the coils run smoothly throughout the production line. Its performance and speed directly affect the efficiency of the entire production line.
Leveler: The leveler removes bends and distortions from the coil and makes it flat. A high precision leveler helps to improve the accuracy of leveling and cutting.
Feeder: The feeder feeds the leveled coil into the shear and sizes it to the required length. Its speed and accuracy affect the efficiency of the entire production line.
Conveyor: The conveyor transfers the sheared sheets to the stacking device. Its speed and stability are critical to the speed and continuity of the entire line.
High-speed Cut-To-Length Lines are suitable not only for steel but also for other metal materials. These lines can be used to process cold and hot rolled carbon steel, silicon steel, tinplate, stainless steel, and coils of all types of metals after surface coating. Therefore, you can choose Cut-To-Length Lines for different materials according to your specific needs.
