Coil slitting machine is a large coil processing line designed to slit metal coils, covering a large area and running at a high speed. In the operation of the operation process needs to be strictly in accordance with the relevant requirements for production. This is not only to ensure the normal operation of the equipment, but also to enhance the efficiency of a necessary means. So, in the operation of the slitting machine before we need to prepare what work? Next KINGREAL for this issue to briefly introduce to you.
Before operating the slitting machine, we need to do a good job of related preparations, the main preparations include: 1. staff should choose and wear suitable protective equipment, remember, the work clothes should be worn to tighten the cuffs, button full buttons, and press the hair in the work cap; 2. pay attention to check whether the hand tools are intact; 3. according to the requirements of the layout of the work site. Usually, the tools and knives should be placed according to the left-handed and right-handed habits.
After the completion of the above work, the staff need to carefully check whether the steel slitting machine is normal, if any abnormalities are found, they must be dealt with in time. In addition, should also check the equipment of the special lifting part is normal. It should be noted that, in the process of checking the equipment, should also check whether the protection device is firm and reliable.
In addition, the staff also need to start the aluminum slitting machine in the empty state, and pay attention to the observation of its working condition in the unloaded operation. In addition, should ensure that its lubrication system and cooling system in a normal state. If it is a large machine tool requires more than two people to operate, it must be clear that the main operator, and cooperate with each other.
The above content for you to briefly introduce the operation of the metal slitting machine before, should do a good job of preparation and attention, I hope that through the sharing of this time, users and friends have a good understanding of the content of this area, and I hope that you in the process of work, can be reasonable application, as far as possible to ensure that the slitting machine is in a normal state of operation.
