Metal slitting machine is designed for processing metal coils of different material thicknesses, the production process of slitting and winding. On into the production and use of the process, there will inevitably be the need for maintenance and cleaning places. For the user, in the use of metal slitting machine this product, not only to master its operating skills, for its daily maintenance and maintenance is also very important. Usually, we should keep the metal slitting machine every week for a clean processing. So for users and friends, we have to adhere to this cleaning process?
In fact, the answer to this question is obviously yes. Doing a good job of daily cleaning treatment can not only help us to use the metal slitter equipment better, but also ensure that our work is smoother. In fact, in addition to cleaning, we also need to carry out some maintenance. For example, in the equipment of the upper and lower knife adjustment, that is, the location of the worm gear worm should add the right amount of grease; In addition, in the equipment of the lower knife shaft clutch also need to add the right amount of lubricant.
In addition, we should also be in the metal slitting machine equipment discharge seat a set of sliding bearing surface and other locations to add the right amount of lubricant, and move left and right, check whether it is smooth. Then in the waste coiling support shaft add grease, and left and right to move the organization for many times, to ensure that there is no abnormality; including the position of the threadless screw group on the drive shaft also need to add the right amount of grease, and keep left and right to move a few times.
For the metal slitting machine equipment in the left and right cylinder seals need to be kept clean. In addition, for the equipment of the discharge shaft pressure plate at the surface of the slide bearing, also need to add the right amount of lubricant; for the equipment of the brake coupling also need to be coated with the right amount of lubricant and try to move a few times; and in the various rollers need to be coated with a certain amount of lubricant.
In summary, for the metal slitting machine, we not only need to follow the operation of the use, but also need to ensure that its weekly cleaning and maintenance, so that our metal slitting machine to maintain a more ideal working condition.
