Cut to Length Line also known as: cross shear line, leveling machine, leveling line, cross shear unit. Cut to Length Line is used for uncoiling, leveling, sizing, shearing and stacking of metal coil into flat sheets of required length. It is suitable for processing cold rolled and hot rolled carbon steel, silicon steel, tinplate, stainless steel and all kinds of metal materials after surface coating.
The cut to length production line mainly consists of loading trolley, uncoiler, leveler, feeding mechanism, shearing machine, conveying device, stacking device and so on. The production line can be equipped with a longitudinal shear to slit the sheet into the required width and length and stacking. It has high degree of automation, simple and reliable operation. It is characterized by high precision of cut-to-length, high flatness of boards and neat stacking.
Coil cut to length machine production line according to the shear equipment can be divided into stop shear, rotary shear and flying shear and other shear mode. Among them, the flying shear cut to length production line has become one of the most popular production lines by virtue of its fast production speed (80M/Min).
Flying shear cut to length line cut 150 pieces of sheet per minute, the maximum operating speed of 80 meters / min. It adopts six-weighted multi-roller leveling machine, which makes the sheet flat and scarless; driven by servo motor, it has high shearing precision; and double-station stacking, which is highly efficient and fast. Suitable for processing cold rolled carbon steel, silicon steel, tinplate, stainless steel and all kinds of metal materials after surface coating.
In order to maintain the accuracy of the cut to length line with fly shearing, to extend its service life, as well as to protect personal and equipment safety, the operation must strictly comply with the following safety regulations:
1. Wear work clothes neatly, female workers should wear a good working cap.
2. Before driving, you must check whether the machine handle and running part is normal.
3. The material should be stuck correctly, clamped, and check whether the leveling and straightening equipment is opened synchronously.
4. After loading the material, we should determine the center positioning and check whether the hole distance is correct.
5. Must stop and change speed. When the machine is running, it is strictly prohibited to touch the material with your hands, and you can not touch the mold and motor with your hands.
6. The machine tool guideway, molds are strictly prohibited to put work, measuring tools and gloves and other items.
7. Do not leave the machine tool after the power on, to concentrate on the operation.
8. At the end of the day, clean the machine, organize the site, cut off the power supply to the machine. Lubricate the gears of the machine.
9. During processing, if you find the machine running sound abnormal or failure, you should immediately cut off the power supply, diagnose the problem or notify the manufacturer.
