Coil slitting machine correct operation and use, thus reducing the abnormal wear and tear of the equipment; do a good job of routine maintenance, can make the equipment to maintain a good working condition, delay the deterioration process, thus ensuring safe operation.
1. Steel coil slitting machine environment: to improve the service life of CNC equipment, the general requirements to avoid direct sunlight and other thermal radiation, not to mention in the humid, dusty or corrosive gases in the place. Especially corrosive gases are prone to corrosion and deterioration of electronic components, resulting in poor contact or short circuit between components, affecting the normal operation of the equipment. Precision CNC equipment must have a good production environment, try to stay away from those vibration is relatively large machinery.
2. Power requirements: the power supply unit is vital both in CNC equipment and other equipment. A stable power supply unit is a prerequisite for the stable operation of a device, so we generally want to add a voltage regulator on the power supply to reduce the fluctuations in the power supply voltage.
3. Operation standardization: operation standardization is to ensure the safe operation of the aluminum coil slitting machine is one of the important measures, the operator must operate according to the operating procedures. Machine failure, the operator to record the scene, good photo retention, and to the maintenance personnel to truthfully explain the situation before and after the failure, in order to facilitate the analysis and diagnosis of the cause of the failure, timely elimination. In addition, the longitudinal shear machine should not be stored for a long time without using, after the purchase of longitudinal shear machine to make full use of, especially into the first year of use, so that it is prone to malfunctioning weaknesses exposed as early as possible, to be ruled out in the warranty period.
In the absence of processing tasks,metal slitting machine should also be regularly energized, it is good to be energized 1-2 times a week, each time the empty run for about 1 hour, in order to use the machine tool's own heat to reduce the humidity inside the machine, so that the electronic components do not get damp, but also in time to find out if there is a battery alarm occurs in order to prevent the loss of the system software, parameters.
