Metal slitting machine, also known as coil slitting line, aluminum slitting machine, steel slitting machine, is a kind of designation for metal slitting equipment. The slitting machine is suitable for carrying out the longitudinal shearing work of metal strips and rewinding the slit narrow strips into rolls. Dramatically easy to operate, high cutting quality, high material utilization, stepless speed regulation of cutting speed and other characteristics. The metal slitting machine production line consists of uncoiling (unwinding), priming and positioning, slitting and longitudinal shearing, and winding (rewinding). It is suitable for the processing of tinplate, silicon steel sheet, aluminum strip, copper, stainless steel sheet, galvanized sheet and other different materials in coils. Common application industries include transformers, motors, home appliances, automobiles, building materials, packaging industry and so on.
For the metal slitter production line equipment how to do a good job of operation?
1. The operation is to send power, in fact, cover the air switch in the control box, and then the slitter indicator will light up. Note that this time do not touch the terminals to prevent electric shock.
2. The operation step can be referred to as on the curtain roll, specifically, it is to open the slitting machine equipment safety head, and then hanging on the curtain roll after the safety head will be closed.
3. Manpower to pass the tape;
4. Drawing line, generally installing the size of the production of adhesive tape to cut into the required specifications, and subsequently draw the line and fix it on the drawing roller.
5. generally known as on the winding roller, the main operation of this step are: first take out the winding shaft, etc., and then the nylon secret medicine and square shaft successively installed, and later open the winding safety card head to install the winding shaft.
6. on the tape head, it should be noted that, must ensure that the tape tension is consistent.
7. In accordance with the production conditions of the splitter, moderately adjust the size of its tension;
8. Should reasonably adjust the winding rate. When these adjustment operations are completed
9. Start the equipment, and make its no-load running one to several laps, to determine the absence of abnormal phenomena.
10. Moderately adjust the tightness of the slitter rolled tape;
11. When the winding is completed, the equipment should be shut down.
12. Product removal. In this process, care should be taken to separate the products, not stacked together to prevent sticking.
13. Fully prepared for the next slitting operation;
14. If it is not used for a long time, then you need to turn off the total power supply of the slitting machine equipment in a timely manner.
