For the coil slitting machine, its normal operation has certain preconditions, only to meet certain conditions, can be normal operation. Among them is the need to rationally control the tension control of the slitter. In fact, for this part of the main problem is not only need to ensure that it is in a steady state can meet such requirements, when in a state of change should also meet the requirements.
That is to say, the time line speed of the steel slitting machine equipment should be maintained at a constant state, and other systems should also be in a constant tension unwind state, or in a variable tension winding state. In other words, in the winding operation, in the whole process, we need to ensure that its winding tension can be increased with the radius of our winding, so as to make appropriate adjustments to meet the production requirements.
Frankly speaking, the tension control of the coil slitting machine actually refers to the tension taper control. Its main purpose is to prevent the increase of stress inside the web. In addition, the advantage of such an operation is also to avoid the strip near the core due to the role of extrusion, thus showing deformation of the bad wrinkle situation. Otherwise, in such a situation is likely to appear scrap, affecting the normal production.
Later, during the normal operation of the metal slitter equipment, special attention should be paid to, whether for the unwinding or winding process, should ensure that the roll diameter will be adjusted appropriately with the change of time. So that its corresponding control system can be within a certain range of normal fluctuations. This can better ensure its production quality.
The above is to share for you about the tension control of the coil slitting machine, I hope that through this sharing, to help you more comprehensive understanding of this aspect of the content, but also be able to bring a certain amount of help for the future work, to help you better operation and use of the aluminum slitting machine equipment.
