Usually before turning on the coil slitting machine equipment, the staff should first complete a series of checks to confirm the normal before turning on the equipment into the working state. Of course, at the same time also need to do a good job of preparation, such as to combine the actual processing requirements, early preparation of the roll core loaded to the winding shaft, and the metal slitting machine winding shaft placed in the winding seat, centered on the placement of the roll orientation.
It is also necessary to press the knife seat down button, which is mainly to facilitate the pressure roller pressed to the winding roll surface of the slitter equipment. After the appropriate adjustment of the lower cutter, so that its cutter and the winding shaft of the core tube seams one to one, and then lock the lower knife. In addition, the upper knife shaft should be adjusted appropriately, so that the upper and lower knives are involved in the depth of about 1.5 millimeters. Tighten the upper knife edge, so that the force is uniformly clamped.
After the above adjustment work is completed, the field operator also needs to put the discharge shaft of the slitting machine equipment into the core of the raw material roll, so that the slanting roll is located in the middle orientation, and then tighten the two ends of the cone top. After that, press the loading button, so that the material rolls automatically into the discharge seat, rotate the axis adjustment hand wheel, adjust the material rolls in the middle of the machine orientation.
It should be noted that, when the staff to make the slitting machine equipment before the combination of winding power, should first make the equipment idle for a period of time, check the working parts of the machine with or without foreign objects, obstacles, and lubrication of all working parts. When the completion of a volume of material slitting work, should be disengaged from the winding power, press the unloading button, the volume of material will be by the hydraulic rocker arm active and smooth down the material roll to the ground.
After the completion of the production work, the staff also need to record about the day's slitting machine equipment running records and production of daily output and other work. And to clean up the site environment and equipment in a timely manner to ensure that the slitting machine equipment neat, good environment, and cut off the power switch before work.
