When using a metal slitting machine, plane positioning is a very critical part of the operation, which directly affects the quality of the slitting and the life of the equipment. You need to make sure that the balance wheel and the machine shaft are installed correctly and tightly, and there is no looseness or offset phenomenon. Looseness between the balance wheel and the machine shaft will lead to a decrease in slitting accuracy. When installing, you need to make sure that the axis of the balance wheel is aligned with the machine shaft and avoid tilting to prevent damage to the wheel shaft or affecting the slitting accuracy.
According to the thickness and hardness of the metal material, adjust the appropriate oscillating running speed to avoid too fast or too slow speed, which may lead to uneven slitting or material breakage. Maintain proper tension during the slitting process, too tight or too loose will affect the effect of the pendulum. Too much tension during the slitting process will increase the load on the equipment, while too much slack may result in material deflection.
Baseline should be noted to hang in easy to adjust the line above the frame, with a line hammer on the center point, in the center of the line should also be locked with a locking pulley to lock the steel line, so that the steel line in the use of the time does not occur displacement. But the use of the period should be regularly rechecked to prevent the displacement of the steel wire.
Metal slitting line plane positioning, another method will be used to swing swing arm measurement method, this method applies to the equipment can be rotated and higher precision requirements, using this method, to a large extent, can adjust the checking equipment for the unit centerline of the perpendicularity. The more common will also include rollers with roller conveyor, live set of rollers, winding machine rolls and other installation when using this method.
Steel coil slitting line elevation adjustment, its installation elevation should be to choose the main working surface of the equipment as a measurement reference or measurement datum (such as the upper plane of the mill base). Based on the nature of the reference point, must be set near the slitting equipment, an auxiliary reference point, convenient equipment in the installation process of elevation adjustment.
Coil slitting machine elevation measurement method, in the base surface should be noted to go to place a ruler, in the ruler placed above the level meter, after that, it is also important to note that must be to use the inner diameter micrometer to measure the ruler under the plane and the distance from the reference point h, the reference point elevation and the sum of h is also for the base of the upper surface elevation. For the more important equipment, it is also important to note that it must be to use the precision level to retest.
