The environmental requirements for the use of a sub -dealer: The machine should be installed in places where the temperature, dryness, ventilation, good light, and convenient operation should be installed.
In the case of the operation process, the staff must choose the appropriate roll core according to the width of the division, and choose the appropriate equipment and the appropriate equipment to the secret medicine for the sub -device.
The seminars are installed on the plane frame, the middle machine, and the rear frame is installed on the predetermined position, and the level calibration is firmly contacted with the foundation. At the same time, the racks cannot be offset, shaking and other phenomena, so as not to cause accidents.
A:Slitting machine, also known as coil slitting line, is a name for metal slitting equipment. The slitting machine is used to uncoiling and slitting various metal coils, and then rewinding the slit narrow strips into rolls, which is suitable for longitudinal shearing of metal strips.
A:Slitting machine is a kind of machine and equipment for longitudinal laser cutting of wide roll raw materials. We can start to grasp from the field of use.
A:Caused by improper adjustment of the blade feeding positioning baffle. It may also be due to the fact that the blade used is too dull in a certain part, and the linear speed of other knives is different.
